Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Pyeon, C. H.*; Katano, Ryota; Oizumi, Akito; Fukushima, Masahiro
Nuclear Science and Engineering, 197(11), p.2902 - 2919, 2023/11
Times Cited Count：1 Percentile：68.31(Nuclear Science & Technology)Sample reactivity and void reactivity experiments are carried out in the solid-moderated and solid-reflected cores at the Kyoto University Critical Assembly (KUCA) with the combined use of aluminum (Al), lead (Pb) and bismuth (Bi) samples, and Al spacers simulating the void. MCNP6.2 eigenvalue calculations together with JENDL-4.0 provide good accuracy of sample reactivity with the comparison of experimental results; also experimental void reactivity is attained by using MCNP6.2 together with JENDL-4.0 and ENDF/B-VII.1 with a marked accuracy of relative difference between experiments and calculations. Uncertainty quantification of sample reactivity and void reactivity is acquired by using the sensitivity coefficients based on MCNP6.2/ksen and covariance library data of SCALE6.2 together with ENDF/B-VII.1, arising from the impact of uncertainty induced by Al, Pb and Bi cross sections. A series of reactivity analyses with the Al spacer simulating the void demonstrates the means of analyzing the void in the solid-moderated and solid-reflected cores at KUCA
Ishida, Shinya; Fukano, Yoshitaka; Tobita, Yoshiharu; Okano, Yasushi
Proceedings of 2023 International Congress on Advanced in Nuclear Power Plants (ICAPP 2023) (Internet), 8 Pages, 2023/04
Ishida, Shinya; Fukano, Yoshitaka; Tobita, Yoshiharu; Okano, Yasushi
Journal of Nuclear Science and Technology, 13 Pages, 2023/00
Times Cited Count：1 Percentile：68.31(Nuclear Science & Technology)Katano, Ryota; Oizumi, Akito; Fukushima, Masahiro; Pyeon, C. H.*
KURNS Progress Report 2020, P. 102, 2021/07
For the design study of ADS, integral experimental data of LBE is necessary to validate cross sections of lead (Pb) and bismuth (Bi). In this study, we conducted Pb and Bi void reactivity measurements using aluminum (Al) void space in Kyoto University Critical Assembly (KUCA). We found that the calculations overestimate the void reactivities of Pb and Bi by about 20 pcm.
Fukushima, Masahiro; Goda, J.*; Oizumi, Akito; Bounds, J.*; Cutler, T.*; Grove, T.*; Hayes, D.*; Hutchinson, J.*; McKenzie, G.*; McSpaden, A.*; et al.
Nuclear Science and Engineering, 194(2), p.138 - 153, 2020/02
Times Cited Count：7 Percentile：61.18(Nuclear Science & Technology)To validate lead (Pb) nuclear cross sections, a series of integral experiments to measure lead void reactivity worth was conducted systematically in three fast spectra with different fuel compositions on the Comet critical assembly of the National Criticality Experiments Research Center. Previous experiments in a high-enriched uranium (HEU)/Pb and a low-enriched uranium (LEU)/Pb systems had been performed in 2016 and 2017, respectively. A follow-on experiment in a plutonium (Pu)/Pb system has been completed. The Pu/Pb system was constructed using lead plates and weapons grade plutonium plates that had been used in the Zero Power Physics Reactor (ZPPR) of Argonne National Laboratory until the 1990s. Furthermore, the HEU/Pb system was re-examined on the Comet critical assembly installed newly with a device that can guarantee the gap reproducibility with a higher accuracy and precision, and then the experimental data was re evaluated. Using the lead void reactivity worth measured in these three cores with different fuel compositions, the latest nuclear data libraries, JENDL 4.0 and ENDF/B VIII.0, were tested with the Monte Carlo calculation code MCNP version 6.1. As a result, the calculations by ENDF/B-VIII.0 were confirmed to agree with lead void reactivity worth measured in all the cores. It was furthermore found that the calculations by JENDL 4.0 overestimate by more than 20% for the Pu/Pb core while being in good agreements for the HEU/Pb and LEU/Pb cores.
Yoshioka, Kenichi*; Kikuchi, Tsukasa*; Gunji, Satoshi*; Kumanomido, Hironori*; Mitsuhashi, Ishi*; Umano, Takuya*; Yamaoka, Mitsuaki*; Okajima, Shigeaki; Fukushima, Masahiro; Nagaya, Yasunobu; et al.
Journal of Nuclear Science and Technology, 52(2), p.282 - 293, 2015/02
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)We have developed a void reactivity evaluation method by using modified conversion ratio measurements in a light water reactor (LWR) critical lattice. Assembly-wise void reactivity is evaluated from the "finite neutron multiplication factor", 
, deduced from the modified conversion ratio of each fuel rod. The distributions of modified conversion ratio and on a reduced-moderation LWR lattice, for which the improvement of negative void reactivity is a serious issue, were measured. Measured values were analyzed with a continuous-energy Monte Carlo method. The measurements and analyses agreed within the measurement uncertainty. The developed method is useful for validating the nuclear design methodology concerning void reactivity.
Shelley, A.; Shimada, Shoichiro*; Kugo, Teruhiko; Okubo, Tsutomu; Iwamura, Takamichi
Nuclear Engineering and Design, 224(3), p.265 - 278, 2003/10
Times Cited Count：15 Percentile：66.87(Nuclear Science & Technology)Parametric studies have been done for a PWR-type reduced-moderation water reactor (RMWR) with seed-blanket fuel assembles to achieve a high conversion ratio, negative void reactivity coefficient and a high burnup. It was found that 50 to 60% of seed in a seed-blanket assembly has higher conversion ratio. The number of seed-blanket layers is 20, in which the number of seed layers is 15 and blanket layers is 5. The fuel assembly with the height of seed of 1000mm
2, internal blanket of 150 mm and axial blanket of 400mm2 is recommended. The conversion ratio is 1.0 and the average burnup in core region is 38.2 GWd/t. The enrichment of fissile Pu is 14.6 wt%. The void coefficient is +21.8 pcm/% void, however, it is expected that the void coefficient will be negative if the radial neutron leakage is taken into account. It is also possible to use this fuel assembly for a high core averaged burnup of 45GWd/t, however, the height of seed must be 500mm2 to improve the void coefficient. The conversion ratio is 0.97 and void coefficient is +20.8 pcm/%void.
Iguchi, Tadashi; Shibamoto, Yasuteru; Asaka, Hideaki; Nakamura, Hideo
Proceedings of 10th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-10), 16 Pages, 2003/10
Thermal-hydraulic and neutronic dynamics are always interrelated in BWR core. This is called thermal-hydraulic and neutronic (T/N) coupling. Channel stability experiments with T/N coupling under non-nuclear condition are very limited. This is mainly due to the difficulties in the real-time simulation of neutron dynamics and in the fast-response void fraction measurement under high-pressure and temperature conditions. Authors have developed techniques to solve the above difficulties, and have succeeded in experimentally simulating T/N coupling under non-nuclear conditions with the THYNC facility. Using THYNC facility, T/N coupling effect on channel stability was investigated. Experiments were performed under Pressure=2-7MPa, Subcooling=10-40K, and Mass flux=270-660kg/m
s. THYNC results indicated T/N coupling lowered the channel stability threshold. The reduction of channel stability threshold due to T/N coupling was small within 10% at 7MPa in the present THYNC experiment, although the experimental condition was set to be more severe than that supposed in a reactor.
Okubo, Tsutomu; Takeda, Renzo*; Iwamura, Takamichi; Yamamoto, Kazuhiko*; Okada, Hiroyuki*
Proceedings of International Conference on Back-End of the Fuel Cycle: From Research to Solutions (GLOBAL 2001) (CD-ROM), 7 Pages, 2001/09
An advanced water-cooled reactor concept named the Reduced-Moderation Water Reactor (RMWR) has been proposed to attain a high conversion ratio more than 1.0 and to achieve the negative void reactivity coefficient. At present, several types of design concepts satisfying both the design targets have been proposed based on the evaluation for the fuel without fission products and minor actinides. In this paper, the feasibility of the RMWR core is investigated and confirmed for the plutonium multiple recycling under advanced reprocessing schemes with low decontamination factors as proposed for the FBR fuel cycle.
Nakajima, Ken; ;
Proceedings of 6th International Conference on Nuclear Criticality Safety (ICNC '99), 3, p.1286 - 1292, 1999/00
no abstracts in English
Akino, Fujiyoshi; Takeuchi, Motoyoshi; Ono, Toshihiko; Kaneko, Yoshihiko
Journal of Nuclear Science and Technology, 34(2), p.185 - 192, 1997/02
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)no abstracts in English
Fuketa, Toyoshi;
Proc. of the 1st JSME/ASME Joint Int. Conf. on Nuclear Engineering, p.271 - 277, 1991/00
no abstracts in English
; Fuketa, Toyoshi;
Proc. of the Int. Conf. on Multiphase Flows 91-TSUKUBA,Vol. 2, p.247 - 250, 1991/00
no abstracts in English
C-J.Jeong*; Okumura, Keisuke; ; Tanaka, Kenichi*
Journal of Nuclear Science and Technology, 27(6), p.515 - 523, 1990/06
no abstracts in English
; ; ;
JAERI-M 87-059, 57 Pages, 1987/05
no abstracts in English
JAERI-M 87-063, 133 Pages, 1987/04
no abstracts in English
;
JAERI-M 85-212, 56 Pages, 1986/01
no abstracts in English
Nakagawa, Masayuki; *
Nuclear Science and Engineering, 53(2), p.214 - 228, 1983/00
no abstracts in English
; *; *; ;
JAERI-M 9931, 41 Pages, 1982/02
no abstracts in English
Nakagawa, Masayuki; ; Katsuragi, Satoru
Journal of Nuclear Science and Technology, 10(7), p.419 - 427, 1973/07
no abstracts in English
